Operation
DIAPERFEEDER IP54
- 3-7 -
Within the
P3 level
the following parameters can be programmed:
OFFSET AUTO
MOTOR CALIBRATION
ACCESS CODE
DEVICE IDENTIFICATION CODE
Within the
P4 level
the following parameter can be programmed:
MOTOR ROTATION DIRECTION
SENSOR TYPE
BAUDRATE
APPLICATION
(
DIAPERS
)
YARN TYPE
(
ALL YARN OR ELASTIC
)
LANGUAGE SELECTION
USE OF INTELLIGENT TENSION CONTROL ACCESSORY
Press the
(Control)
button to switch from one programming level to the next one.
Press
(Reset)
button to quit the programming environment.
+
The following pages provide detailed information about the DIAPERFEEDER
IP54 device programming.
However, in the SMART MATRIX
WINDINGFEEDER
application, the
parameter programming is always carried out via SMART MATRIX terminal,
therefore, such information are merely indicative.
