Technical Data and Installation
DIAPERFEEDER IP54
- 2.15 -
Instructions for Correct Yarn Threading
Thread the yarn inside the lower buckle
, then make one coil around the roller
, passing
beneath the separation element
, as shown on the figure above.
Set the yarn over the loading cell of TS44 sensor
and thread it out of the upper buckle
.
For correct separation of yarn coils on the coil separation element
, slightly tilt the separation
device, while the DIAPERFEEDER IP54 is running, turning the adjustment screw
.
E
F
B
C
D
A
