Operation
DIAPERFEEDER IP54
- 3-1 -
3 – OPERATION
Operating Characteristics of DIAPERFEEDER IP54 Devices
For programming and control of DIAPERFEEDER IP54 devices, 3 push-buttons, with
green/red built-in LEDS and a LCD display are available to the operator.
1. E PUSH BUTTON (ENTER)
Press and hold down this push-button to
gain access
to the advanced device
programmable functions.
During the programming phase, press it to
confirm
the displayed parameter.
Pressing and holding down this push-button for about 3 seconds on particular
parameters, you will have the possibility to
enable/disable
the corresponding function.
2. – PUSH BUTTON (RESET)
Press this push-button to cancel possible error signaling on DIAPERFEEDER IP54
display
(red LED flashing).
During the Programming phase, press it to
decrease
the value of displayed parameter. During the Control stage, without an alarm
condition in progress, this button allows you to display the device internal
temperature.
