Medium voltage switchgear QMT
47
Installa
tion manual
1 Receipt
1.1
Control on receipt
Upon receipt, check the packing list against the equipment received to ensure the order is com-
plete.
Should any damages or irregularities be noticed when unpacking carefully, notify it within 5
days from receipt of the goods. Any notification must indicate the delivery note number or order
number and the serial number of the damaged module.
CAUTION
In case of vacuum circuit-breaker, before carring out any operation, always make sure that
the operating mechanism springs are discharged and the circuit-breaker is in open position.
1.2
Storage and handling
QMT is provided with metallic feet h=100mm which can be disassembled or screwed to
wooden pallet.
If the switchboard has to be stored even for short periods before putting into service, it is recom-
mended to cover it with a waterproof cloth and not to expose it in a direct sun light.
Avoid exposing QMT to rain or to intense temperatures (under –20°C or above 65°C).
CAUTION
- QMT has to be stored in a dry, dust free ambient where there are no chemical agents.
- Place the switchboard to a horizontal surface, not in direct contact with the floor but on a suit-
able support.
- Do not keep QMT in closed position in order to prevent unwarranted stresses and risks of acci-
dents to personnel.
QMT must be placed on a sturdy surface, and preferably lifted with an
appropriate fork-lift truck.
It is allowed to use rope spring catches: In this case hook the rope
spring catches to the switchboard eyebolts as showed in the figure
(the lifting plates are supplied on request).
Fig. 2
Fig. 3
Fig. 1
Summary of Contents for QMT Series
