Extreme Networks Summit X430 Series, Installation Notes

Page: 1 / 12

Part Number: 120882-00 Rev. 02
1
Summit X430 Series Switches
Installation Note
Pre-installation Requirements
Before you install the Summit X430 series switch, read the information in “Safety Information” on
page 2 .
The following items are provide with the Summit X430 series switch:
●
Mounting brackets
●
Eight M3 screws to secure the mounting brackets to the switch
To install the switch in a rack, you need the following additional tools and equipment:
●
Four rack mounting screws to match your equipment rack
●
Screwdriver to fit the rack mounting screws
●
AC power cord that is suitable for the current rating of this product (See “Selecting AC Power
Supply Cords” on page 4 .
Required Tools
The following items are provided with the Summit X430 series switch:
●
Two rack mounting brackets adaptable for either a front-mount or mid-mount installation
●
Twelve screws for attaching the brackets to the switch enclosure
●
For DC models, spade terminal and M4 screw with captive washer for grounding the switch
You need the following additional tools and materials to install the switch in a rack:
●
#1 Phillips screwdriver
●
Four rack mounting screws to match your equipment rack
●
Screwdriver to fit the rack mounting screws
●
#14 AWG stranded copper cable for grounding the switch (DC powered models)
●
ESD-preventive wrist strap for installing optional ports at the back of the switch