Press RECALL if you are connected behind a
switchboard and wish to transfer or put a call
on hold. (Please refer to your Switchboard
User Guide). If you are connected to a direct
line you can use RECALL with services such
as Call Waiting and Three Way Calling.
With the PULSE/TONE switch set to TONE,
the unit will generate a Timed Break Recall
(TBR) of approximately 100 milliseconds.
You can set the PULSE/TONE switch to
PULSE for an Earth Recall.
You can also make a call with an additional
phone plugged into the EXT. TEL. Socket on
the Conference Unit.
Make a call with the telephone in the normal
way and then when you are ready to transfer
this call to the Conference Unit, press
ON/OFF on the Conference unit and then
hang up the telephone. The call will be
transferred and the red indicator light will
be on.
Please note:
You need to hang up the telephone or a
loud whistling noise (known as feedback)
will be heard.
Making a call using an
additional telephone
Recall
USING
THE
UNIT
5
For use with the network service Three Way
Calling. This will join all three parties
together in an open Three Way Call. To use
the JOIN button on your conference unit you
must first check with your telephony
provider that this service is available on your
line. If it is then these are the steps to set up
a Three Way Conference call with this Unit.
Press ON/OFF, the red
indicator will light and you will
hear dial tone.
Dial the number of the first
person you wish to speak to using
the keypad.
Once connected to the first person,
advise them that you are setting up
a Three Way Conference call and
ask them to hold the line whilst
you set up the call.
Press RECALL.
Wait for dial tone.
Dial the number of the second
person using the keypad.
(If this person is not available, press
RECALL to continue your first call).
Press JOIN and this will join all
three parties together to start an
open Three Way Conference call.
To end the call. Press the
ON/OFF button and the red
indicator light will go out.
Please note:
If you decide to leave the call,the other two
callers will not be able to continue talking
to each other.
Join
To use the join button
User Guide pages (1) 17/6/02 3:12 PM Page 5
