Maintenance
Low Battery Warning
The Keypad is powered by a 3V lithium battery which
will last for up to 3 years. When the Keypad battery is
running low, the Control Panel will display the message
KEYPAD LOW BATTERY and the CHECK indicator light
will be illuminated.
Replacing The Battery
1. Remove the wall-mounting bracket by pushing
downward.
2. Slide down the battery cover and remove the
old battery.
3. Insert the new battery (observing po and –).
4. Replace the battery cover.
Cleaning
Clean with a soft cloth or damp sponge with a mild
detergent. Wipe dry immediately. Do not submerge in
water and do not use abrasives or solvents.
Support
For further assistance
If you need further information, please refer in the
first instance to the main BT Home Monitor VP1000
User Guide.
Alternatively, BT advisors are on hand to assist –
24 hours a day, 7 days a week.
Telephone:
0870 240 1979
. Call charges will apply.
Or email:
Important Information
Product Information
Wireless systems are reliable and tested to high standards.
However, due to their transmitting power and range,
there are some limitations to be considered:
• Receivers may be blocked by radio signals occurring
on or near operating frequencies, regardless of the
code selected.
• A receiver can only respond to one transmitted signal
at a time.
• Wireless equipment should be tested regularly to
determine whether there are sources of interference
and to protect against faults.
Specifications
Transmitted
Powercode (Help, Fire and
ID Type:
Emergency) and CodeSecure
(Switching On and Off)
Frequency (MHz):
868.95
Battery:
3VDC Lithium Type CR123A
Current
10µA (during standby), 95mA
Consumption:
(during transmission including LED
and back light currents)
Battery Life
3 years (for typical use)
Expectancy:
Operating
0ºC – 49ºC (32ºF – 120ºF)
Temperature:
Dimensions
:
127 x 70 x 24mm (5 x 2
3
⁄
4
x 31/32in)
Colour:
Ivory
BT Home Monitor Keypad
VP
Installation and User Guide
BT Home Monitor Keypad VP – Edition 08 – 21.03.03
4
Downloaded from www.ukpanels.com
