Keypad Indicator Light
COLOUR
FUNCTION
Red
Lights during transmission
Amber
Lights during programming
Green
Lights upon each press of a button
Red and Green
Lights upon each press of a Help,
alternately
Fire or Emergency button
Set/Change Your User Codes
If you have not done so already, you should change your
User Code from the default setting – 2580. If you have
already selected new codes for your Control Panel you
will need to program your Keypad with these same codes.
Please follow the instructions below:
PRESS
DISPLAY
Green LED flashes slowly.
Enter the MASTER CODE – if you have
not selected a personal PIN number, this will be
the default setting – 2580.
Press
1
to set/change a new master User Code
Or
Press a button between
2
and
8
to set/change an
additional User Code for other family members.
Enter the new 4-digit code you want.
You will hear a confirmation melody and
the Amber LED will flash slowly.
To confirm the change.
Using Multiple Keypads
The Keypad acts in the same way as the Control Panel,
so only User 1 is able to have full control over the system,
including the ability to change the BT Home Monitor
VP1000 operational settings. Up to 7 other users can
have limited access rights, such as the ability to turn the
system on and off, by assigning individual user codes.
Deleting A Keypad
You may at some point decide you do not wish to use
one or more of the Keypads.
To delete a Keypad from the Control Panel, follow these
instructions.
PRESS
DISPLAY
Until the display shows SYSTEM PROFILE.
Enter the MASTER CODE – if you have
not selected a personal PIN number, this will be
the default setting – 2580.
Until the display shows ADD/DEL KEYPAD.
Display shows KEYPAD NO:–
Enter the number of the Keypad you wish
to delete, e.g. 1 or press NEXT to scroll
through the list.
Display shows <OFF> TO DELETE.
Display shows KEYPAD NO: (number).
Choose either:
To move to the next Keypad. Or:
Three times, then <OK> to exit and return
to READY.
To test that the Keypad has successfully been deleted,
press the
button, followed by your User Code, to
see whether the Control Panel responds. You may also
wish to remove the battery.
Please remember to update your personal online account
with this information so that your monitoring service can
report information accurately.
ON
#
4
1
#
BT Home Monitor Keypad
VP
Installation and User Guide
BT Home Monitor Keypad VP – Edition 08 – 21.03.03
3
eg.
0
OFF
SHOW / OK
NEXT
NEXT
SHOW / OK
SHOW / OK
NEXT
0
HOME
Downloaded from www.ukpanels.com