![background image](http://html.mh-extra.com/html/bt/easicom-tv3/easicom-tv3_user-manual_2823887020.webp)
19
To stop dialling, press
CANCEL
or the
key. Screen shows
DISCONNECTING
.
If you get the screen message
CANNOT CONNECT
TO SERVICE PROVIDER
, it may be that the line
to the service provider is busy.
Back
Automatic line hang up
Giving you maximum cost efficiency, once your
e-mail has been sent and any new incoming
messages received, your Easicom
T V3
automatically hangs up the line.
If your message is not ready to send,
you can save it in the draft folder and
finish it later.
The user list is displayed.
To highlight the user name you want.
KEYPAD
Type in the password.
The INBOX screen is displayed.
NEW
To display the e-mail message screen.
MESSAGE
To move the cursor.
OR
KEYPAD
Type your message, entering the e-mail
address and subject.
SAVE
Your e-mail is checked for spelling.
When the spell check is complete, the
e-mail is saved in the Draft folder.
Tab/Aux
Enter
Enter
To save unfinished e-mail
messages in the draft folder
To send e-mail messages from the
outbox
When you have e-mails stored in the
Outbox and are ready to send them. You
can do this at any time even when the
television is switched off.
Any incoming e-mails will be received.
The indicator lights on your Set Top
Box let you follow what is happening.
If your TV is turned on, the screen
shows
DIALLING SERVICE PROVIDER
to send your e-mail messages. Any
incoming messages will also be
downloaded to your Easicom
T V3
.
Please note that when you connect to
Freeserve, all e-mail stored in the Outbox
– by any of the users – will be sent.
Send/
Receive
䊴
䊴
䊴
䊴
USING