BT DIVERSE ISDN User Manual Download Page 23

Page: 23 / 53

NEXT

Press

NEXT

to highlight the

desired destination.

Press

. You now have to set

the number of ring cycles your
handset should receive before the
call gets forwarded. Display shows
a menu listing all possible settings
with

ACT

in front of the active

setting.

NEXT

Press

NEXT

to highlight the

desired setting.

SAVE

Press

SAVE

to confirm the

change or

if keeping the

active setting.

Press buttons in order shown

Press the

PHONE

button. Display

will show

FNCT.SET.ACT

to indicate

at least one system function such
as call forwarding has been set.

Press the

MENU

button.

Menu item

SYSTEMFUNCT.SET

. is

highlighted.

Press

. Menu lists all functions

that have been set.

NEXT

Press

NEXT

to highlight

INT.CALL

FORWARD

Press

. Display shows where

internal call is set to forward to.

OFF

Press

OFF

to switch off internal

call forwarding.

ISDN Customer Controlled
Call Forwarding

This enables you to forward an external
call to another external number.

There are 3 types of external call
forwarding:

– all calls
– on busy
– on no reply (after 5 rings).

These options work for both Point-to-
Multipoint and Point-to-Point connections.
When in Point-to-Multipoint mode
external call forwarding is not available
until MSNs have been set up.

To switch internal call forwarding off

EXECUTIVE HANDSET

IMPORTANT!

Please check with your ISDN service

provider if the Customer Controlled

External Call Forwarding

Supplementary Service is supported.

Please also check the cost of the

service and calls before using the

service.

Summary of Contents for DIVERSE ISDN






















































Search results

Summary of Contents for DIVERSE ISDN

Reviews:

Related manuals for DIVERSE ISDN

Brands by name

Popular brands

BT DIVERSE ISDN, User Manual

Search results

Summary of Contents for DIVERSE ISDN

Reviews:

Related manuals for DIVERSE ISDN

Brands by name

Popular brands