Call handover
When you have a multibase system
(see your System Set-Up Guide), during
an external call you can wander out of
the range of one base station and into the
range of an adjacent one without losing
your call.
During an external call when you
are approaching the range limit
of the base station you are using
you will hear 4 beeps. At this
point to avoid losing the call you
must move nearer to the base
station. When using a multibase
multicell system an option to
change base stations becomes
available if the handset is within
range of two base stations it is
registered with. Remember to
warn the other person that there
will be a short break in the
conversation whilst you change
bases.
CHANGE
Press
CHANGE
. Resume the call.
IMPORTANT!
You can also park a call at one
base and unpark it at another base
which is part of a multibase
(multicell) system, however, this
operation is dependant on the
HOLD
ISDN Supplementary service
being available. Please check with
your ISDN service provider whether
this service is available.
Press buttons in order shown
At any registered Executive
Handset:
Press the
MENU
button.
▼
Press
DOWN
to highlight
SERVICE
.
OK
Press
OK
.
NEXT
Press
NEXT
to highlight
CANCEL
CALL PARK
.
OK
Press
OK
.
(CODE)
Enter your single digit security
code.
OK
Press
OK
. You can now resume
your conversation.
15
To pick up a parked call
To use call handover
EXECUTIVE HANDSET
