background image

If you need some help, call us on 

0800 218 2182*

 or go to 

bt.com/producthelp 

Clock/Alarm

43

If you select Off and press 

 the display will show 

Alarm off

 and you will hear a 

confirmation tone.

Set an alarm

1.  Select 

Menu

, scroll 

 to 

Clock/Alarm

 and press 

.

2. 

Alarm

 is displayed, press 

3. Press 

 or 

 to display the alarm frequency you 

want: 

Off

On

 

Once

On

 

Daily

Mon

 

to

 

Fri

 or 

Sat

 

&

 

Sun

 

and press 

.

4.  Enter the alarm time using the keypad and press 

.

5.  Press 

 or 

 to hear and choose the alarm melody 

you want, press 

 to confirm your choice.

6.  You will hear a confirmation tone and the display will 

briefly show 

Alarm

 

on

 and the time you have set.

Stopping the alarm when it goes off

When the alarm goes off, the selected melody 
will play at an ascending volume and the handset 
backlight will flash. The display will show the alarm 
time and also the message 

10

 

min

 

snooze?

To stop the alarm, press 

 or 

.

To activate a ten minute snooze, press 

 or  

any other button (except 

 or 

 

).

When you’ve set an alarm, the 

 icon will appear on the idle 

screen to confirm an alarm has 
been set.

If an incoming call is received 
while the alarm is going off, 

the alarm notification will 
immediately stop and the 
incoming call will be shown  
on the display. The alarm will 
not resume.

Summary of Contents for BT1100





























































Reviews: