6
Operation
62/108
CLS Pro 600 – Line and Contrast Sensor
Parameter
Function / Meaning
The screen will not be dimmed if ‘0’ min is
entered as the setting.
active USB:
Activates the memory function. The panel’s
configuration data can also be accessed via
the USB interface and this data can also be
saved externally if necessary. Furthermore,
this also gives you the option of loading firm-
ware updates. Press the
ENTER
or
ESC
but-
tons to shut down the connection.
manual settings:
Other setting up options can be activated in
set-up. These are:
enable alternative edge:
This gives you the option of selecting an al-
ternative contrast. The left edge limit will
flash red on the screen. You can select any
other edge that is found.
enable alternative 2. edge:
This gives you the option of selecting a rear
edge for line scanning. The right edge limit
will flash red. You can select any other edge
that is found.
enable alternative line:
This gives you the option of selecting an al-
ternative line. Both edge limits will flash red.
You can select any other line that is found.
hide menu:
If the parameter is active you can call up the
main menu by holding down the menu key
for 3 seconds. If the parameter is inactive
you can access the main menu via the entry
in the quick menu.
NOTICE! You must completely exit the
menu (quick menu as well) at least
once before you can deactivate "hide
menu". Do not press the ESC key as
otherwise the changes will not be im-
ported.
disable operating
error dialog:
Warning and information dialogs can be sup-
pressed whilst working if this parameter is
activated.
6.7.1.2 \\configuration\sensor\
sensor:
The parameters that apply to the sensor are configured in this
sub-menu.
