manualshive.com logo in svg

Bryston SP3, Manual

Share
Download
Bryston SP3 Manual Download Page 24

APPENDIX B:  RS232 SERIAL CODES continued

RBVL        Right Back Vol Trim    RBVLxxxx 

        UP    Up 1 step (0.5dB)     

        DN    Down 1 step (0.5dB)     

        xxxx = 0880..1120 
            (-12.0..12.0dB)     

        QS    Query Status     

 

SPFR        Front Speakers Setup SPFRxx 
        00    Off (Not allowed)     
        01    Small     

        02    Large     
        QS    Query Status     
             

SPCN        Centre Speaker Setup SPCNxx 
        00    Off     

        01    Small     
        02    Large     

        QS    Query Status     

             
SPSB        Subwoofer Setup        SPSBxx 
        00    Off     

        01    On (not in bypass)     
        02    On (also in bypass)     

        QS    Query Status     
             
SPSR        Surr Speakers Setup    SPSRxx 

        00    Off     
        01    Small     
        02    Large     

        QS    Query Status     
             

SPBK        Back Speakers Setup    SPBKxx 
        00    Off     
        01    1 Small     

        02    2 Small     
        03    1 Large     
        04    2 Large     

        QS    Query Status     
             

SPCF        Speaker Config      SPCFxx 
            (Fr/C/Sur/Back/Sub) 
        00  no change or unknown (only QS) 

        01    S/S/S/S2/Y     
        02    L/S/S/S2/N     
        03    L/L/L/L2/N     

        04    L/N/N/N/N     
        05    L/L/L/L2/Y     

        06    L/L/S/S2/Y     
        QS    Query Status     
             

XBAS        Extra Bass Setup    XBASxxxx 
            (sub must be on and 
             front=large only)     

        00    Off or not applicable 

        0000 same as above 

        xxxx = 0800..1000 

            (-20.0 .. 0.0dB)     
        QS    Query Status  

             

MDSL        Mode Select            MDSLxx 

        00    not applicable or ignore 
        AN    Analog     

        DI    Digital     

        HD    HDMI     
        BP    Bypass 2-Channel     

        QS    Query Status     

             

DISP        Display brightness    DISPxx 
                                DISPxxx...x 
        ON    On     

        OF    Off     
        01    25% Brightness     
        02    50% Brightness     

        03    75% Brightness     
        04    100% Brightness     

        L1    Returns Line 1     
        L2    Returns Line 2     

        L3    Returns Line 3     

        L4    Returns Line 4     
        QS    Query Status     
             

LMOD        Set Listening Mode    LMODxx 
            -- MultiCh 2-->7.1 -- 

        00    No Effect     
        01    Pro Logic (emulates 
              the old standard!)     

        02    Dolby Pro Logic Music     

        03    Dolby Pro Logic II Movie     
        04    Neo:6 Music 

        05    Neo:6 Cinema 
        06    Stereo7 (MST 7.1 spk) 

        07    Party (MST mono 7.1 spk) 
        08    Room Reverb: Hall 
        09    Room Reverb: Church 

        10    Room Reverb: Stadium 
        11    Room Reverb: Club 
        12    Room Reverb: Theatre 

        13    Natural 
        14    Stereo7x (MTX 7.1 spk) 

            -- MultiCh 5.1-->7.1 -- 
        21    Dolby Digital 5.1 (no back) 

        22    Dolby Digital EX 6.1 Movie 

        23    Dolby Pro Logic EX 6.1 Music 
        24    Dolby Pro Logic  IIx ex 7.1 Movie 
        25    Dolby Pro Logic IIx ex 7.1 Music 

        26    Dolby Pro Logic IIx ex AUTO 
            -- 1 or 2 CH -- 

        ST    STEREO (2.1 speakers) 
        MN    MONO (2.1 speakers) 
        QS    Query Status 

 
DVOL        Dynamic Range(DRC)  DVOLxx 
            and Dolby Volume(DV) 

        00    ALL OFF 

        01    DRC OFF; DV LOW - FULL 

        02    DRC OFF; DV MED - FULL 

        03    DRC OFF; DV HI  - FULL 

        04    DRC OFF; DV LOW - HALF 

        05    DRC OFF; DV MED - HALF 

        06    DRC OFF; DV HI  - HALF 

        07    DRC MED1;DV OFF 

        08    DRC LOW2;DV OFF 

        09    DRC AUTO;DV OFF 

        QS    Query Status 

 

DDVL        Dolby Volume Adj    DDVLxxxxxxx 
        xxxx = 0200..1120 

            (-80.0..12.0dB) 

            Set DV Calib. Offset 
            (default=0,high= 

             less loud!) 
        MS0    Mid/Side OFF (default) 

        MS1    Mid/Side ON  (useful 

                           in stereo) 

        QS  Query Status 

            (resp example DDVL0000MS1) 
             
TEST        Pink noise setup    TESTxx 

        ALL    Automatically sequence 
            all channels every 4s, 
            then exit. 

        MAN    Start manual sequence 
            or increment channel if 

            already started 
        LF    Start Left front    (01)     
        CN    Start Centre        (02) 

        RF    Start Right front   (03)  
        RS    Start Right surround(04)    
        RB    Start Right back    (05) 

        LB    Start Left back     (06) 
        LS    Start Left surround (07)    

        SB    Start Subwoofer     (08) 
        EX    Stop and Exit pink       
            noise setup 

        QS  query status. Resp 
            00 = not playing  
            01 = L (front left speaker) 

            02 = C 
            03 = R 

            04 = RS 
            05 = RB 
            06 = LB 

            07 = LS 
            08 = SUB 
             

INPT        Query Input Signal    INPTxx 
            (Source Program) 

        QS query, response xx= 
            00: Unknown or illegal 
            01: Analog, BP7 or BP2  

            02: Digital pass-through 
            03: Pink-noise test 
            04: Auto 

            05: Bitstream 

            06: All DTS formats  

            07: PCM Auto 

            08: PCM (CD audio) 

            09: PCM 8 ch 

            0a: AC3 (Dolby Digital) 

            0b: DTS  

Summary of Contents for SP3









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands