Bryant Evolution Connex SYSTXBBECC01-A, Installation Instructions Manual

Page: 12 / 100

2
conditions, and other data are passed continually between components over the
ABCD bus. The result is a new level of comfort, versatility, and simplicity.
All Evolution
r
furnaces or fan coils are variable--speed and multi stage for
maximum flexibility, efficiency, and comfort. They support controlled ventilation,
humidification, dehumidification, and air quality control. Either an Evolution
r
(communicating), or a standard single--stage 24VAC controlled outdoor unit may be
used.
When using a Bryant HRV or ERV with a zoned system, the Evolution
r
Zone
board allows connection of a Bryant HRV or ERV without the need for separate
wall control.
When using conventional single--stage outdoor units, the Evolution furnace or fan
coil provides the 24 volt signals needed to control them. Also, the Evolution
r
Network Interface Module (P/N SYSTXBBNIM01) allows connection of a Bryant
HRV or ERV without the need for separate wall control.
All system components are controlled through the wall mounted Evolution Connex
Control, which replaces the conventional thermostat and provides the homeowner
with a single wall control for all features of the system.
3. Quick Start
3.1. Set Time and Date
The time and date can either be set manually or can be synchronized with the web
server (only for Wi--Fi enabled units). From the main screen, touch MENU , on the
bottom of the control. The
TIME/DATE
icon will bring up the time and date menu.