Advanced Installation and Configuration Instructions
Table of Contents
How to use this document. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Hardware Differences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Start-Up –> Dehum for Fan Coil or Furnace . . . . . . . . . . . . . . . . . . . . 10
Safety Considerations
Read and follow manufacturer instructions carefully. Follow all local
electrical codes during installation. All wiring must conform to local and
national electrical codes. Improper wiring or installation may damage
Thermostat.
Recognize safety information. This is the safety-alert symbol . When
you see this symbol on the equipment and in the instruction manual, be
alert to the potential for personal injury.
Understand the signal words DANGER, WARNING, and CAUTION.
These words are used with the safety-alert symbol. DANGER identifies
the most serious hazards which will result in severe personal injury or
death. WARNING signifies a hazard which could result in personal
injury or death. CAUTION is used to identify unsafe practices which
may result in minor personal injury or product and property damage.
NOTE is used to highlight suggestions which will result in enhanced
installation, reliability, or operation.
Introduction
The ecobee Smart Thermostat Pro with voice control, Powered by
Bryant and the ecobee3 lite Pro, Powered by Bryant provides your
customers with freedom and flexibility to manage their home
environment. These thermostats help homeowners conserve energy, save
money and reduce their environmental impact. They support a furnace
with AC and up to 2-stages of heat. For heat pumps (air to air or
Geothermal) they support up to four stages of heat (2-stage heat pump,
2-stage auxiliary heat) and two stages of cool. For these systems the
thermostats can control a single accessory, such as a humidifier,
dehumidifier, ventilator, HRV or ERV. Also, the thermostats can be
installed with the PEK if a C wire isn't present. Additionally, the
thermostats can control boilers with or without an AC. When connected
to a boiler, the thermostats support up to 2-stage of heat and 2-stages of
cool and a single accessory, such as a humidifier, dehumidifier,
ventilator, HRV or ERV. When used with a boiler they cannot be
installed with the PEK if a C wire isn't present, the C wire must come
from the air handler, not the boiler.
How to use this document
The advanced installation and configuration instructions are intended to
supplement the standard installation instructions shipped with the
thermostat or available for download on www.HVACpartners.com. The
advanced settings and configuration options detailed in this document
are intended for professional installers only. Incorrect configuration may
lead to improper operation and equipment damage.
Each section of this document is outlined in the following structure:
Section Title
Location of this section within the thermostat menus.
Image showing available features in this section on the thermostat.
Feature Title
Feature Description
• Default Configuration
• Configuration Options
Image showing screen on the thermostat
EB-STATE3LTBB-01, EB-STATE3LTBR-01,
EB-STATE5BB-01, EB-STATE5BR-01
A200491
ecobee Smart Thermostat Pro with voice control, Powered by Bryant
A200492
ecobee3 lite Pro, Powered by Bryant
WARNING
!
ELECTRICAL OPERATION HAZARD
Failure to follow this warning could result in personal injury or death.
Before installing, modifying, or servicing system, main electrical
disconnect switch must be in the off position. There may be more than
1 disconnect switch. Lock out and tag switch with a suitable warning
label.
CAUTION
!
ELECTRICAL OPERATION HAZARD
Failure to follow this caution may result in equipment damage or
improper operation.
Improper wiring or installation may damage the thermostat. Check to
make sure wiring is connect before proceeding with installation or
turning on unit.
