35
Place the retroreflector in front of the mirror so that the
tracker beam path is aimed at the center of the mirror.
At this point, the beam is reflected off the mirror and
directly into the retroreflector sitting in target nest A.
Break the beam again, and then remove the retroreflector
from target nest A.
Break the beam path and remove the retroreflector to end tracking. The laser beam should
now reflect off of the mirror.
Place the retroreflector near target A in the path of the reflected beam, and allow the tracker to re-acquire the
retroreflector. Once the tracker locks on, place the target in target nest A.
