22
Test Mode: Manual Data Entry
Manual Data Entry
mode is an
easy way to run the test for the
first time, and can be useful for
familiarization and training. To
begin
Manual Data Entry
mode,
be sure that the tracker to be
tested has been entered into
My
Tracker List
. In this mode, you are
responsible for:
• Determining the number
of calibration target shot
repetitions
• Verifying the measurement units
(in or mm)
• Verifying the temperature units
(°F or °C)
• Selecting the tracker to be
evaluated
If the tracker you wish to test is not shown in the
tracker used in test
box, add it to the list by clicking on the
My Tracker
List
icon on the toolbar or selecting
My Tracker List
from the
Tracker
menu.
To begin the routine, click the
Start
button. KinAiry
then brings the
Evaluation
tab forward. Follow the
instructions and enter the data for each step. Navigate
through the procedure using the
Next
and
Back
buttons. Modify or confirm the MPE coefficients and
uncertainty budget items on the
Values
tab so that
they match the test conditions, then proceed to the
Results
tab.
Once a test is completed, save the file for reference at a
later time. Monitoring laser tracker performance over
time can give you powerful insights.
