©2009,1996 BRUNO INDEPENDENT LIVING AIDS, INC.®
SRE-1550 02-09-2009
6
NOTE:
THE STANDARD
STAIRWAY ELEVATOR
IS SUITABLE FOR
STAIRWAY ANGLES UP
TO 45 DEGREES.
Be sure you have all
necessary
parts and tools
before
traveling to
installation site.
• protractor level, builder's level
• socket set, metric
(10 mm through 22 m)
• ratchet, with 6" extension
• combination wrench set, metric
(22 mm through 36 mm)
• Phillips screwdrivers
• slotted screwdrivers
• Allen wrenches, metric
(4 mm minimum size)
•
torque wrench (one that handles 50-80 ft.lb./68-108 Nm)
• electric drill with letter `O' (.316") and 1/4" bit
• hack
saw with 2 or 3 blades, or metal cutting
bandsaw
• 20' tape measure
• small rubber mallet
• C-clamp
• flashlight
• 5/16" open-end wrench
• needle nose pliers
• scissors or knife
• extension cord
• doubl
e-sided foam tape
• file
•
12" adjustable wrench
• additional hardware for installation on floor surface(s)
other than wood
Bruno ships the Stairway Elevator with fasteners
appropriate for
WOODEN STAIR TREADS ONLY
.
Other stair material may require different fasteners.
Please contact Bruno Independent Living Aids, Inc.
for information.
INSTALLATION
Necessary Tools
