©2009,1996 BRUNO INDEPENDENT LIVING AIDS, INC.®
SRE-1550 02-09-2009
34
•
Clean rails, racks and wheels. Regrease.
• Check for dry and/or worn belts.
Lubricate.
• Check rail wear.
There should be no groove.
• Clean charging contacts (both carriage and rail ends)
withScotch Brite®.
• Check battery voltage (load test).
• Check safety switches (footrest, carriage, seat).
• Check armrest switch and keyswitch (if
applicable).
• Check battery charger output:
• Load test using remote controls:
▫ Check voltage while carriage is
traveling up.
▫ Test with carriage against contacts.
▫ Test with carriage away from contacts.
▫ Check contac
ts and lights.
• Check speed.
• Check seat belt for wear and proper operation.
• Examine exposed wiring.
Are there any cuts or abra
sions?
• Verify operation of s
eat swivel mechanism.
Does it move
easily and lock in place correctly?
• Check that all hardware is properly tightened.
MAINTENANCE
YEARLY MAINTENANCE OPERATIONS
After replacing the belt, tighten the new belt to the proper
tension. Tighten the motor bolts to the torque specified on
drawing SRE-00648 at the back of this manual.
BELT REPLACEMENT NOTE
