CRE-2110 OPERATOR 09-27-2021
9
MAINTENANCE TIPS
Back of transmitter
with battery access
cover removed
General Maintenance Tips
•
Keep the rail channel clean and free of debris.
•
Park the stairlift at one end of the rail when not in use
to keep
batteries charged.
•
Keep battery charger plugged into a live outlet .
•
Contact your Bruno dealer annually to have the
stairlift examined, cleaned and lubricated.
Remote Battery Replacement
• Remove access panel on back.
• Replace two AA alkaline batteries.
• Change batteries annually.
Vacation and Long-Term Storage
• Turn off the circuit breaker (ON/OFF switch
near the seat).
• Unplug the battery charger from the wall .
Once you are ready for the stairlift to return to action,
make sure the batteries are charged and rail free of dust.
• Reconnect the charger to the wall outlet .
• Turn on the power switch on the battery charger.
• Turn on the main power switch on the stairlift
carriage .
• Wait until the LED light on the charger turns green to
depict full battery charge .
• Dust rail with wax-based cleaner, such as Pledge
®
.
Circuit Breaker Note
The stairlift includes an ON/OFF switch with a built-in
circuit breaker that protects the battery, controller and
motor circuits in the stairlift carriage. It is unlikely the
circuit breaker will trip. However, if the stairlift be
-
comes inoperative, check the circuit breaker and reset
if needed. Possible causes of circuit breaker tripping:
• Foreign object jamming the rail or gear rack.
• Exceeding the rated weight capacity of the stairlift.
ON/OFF switch
with built-in
circuit breaker
