![Bruno CRE-2110 Operator'S Manual Download Page 6](http://html1.mh-extra.com/html/bruno/cre-2110/cre-2110_operators-manual_2821184006.webp)
CRE-2110 OPERATOR 09-27-2021
6
OPERATION
Standard Swivel Seat
Swivel Positions: The Elite Curve seat, with standard
armrests, swivels a total of 135 degrees.
The seat locks
in three positions: the center “home” position and 60 and
90 degrees at the top landing. (
Some installations allow
the chair to swivel 45 degrees to the bottom landing.
)
How to Rotate Seat
: Swivel the seat at the top landing to
safely exit away from the steps. Lift the release handle
located under the seat (on either side of the chair). Once
the swivel lever is released, the seat will lock in the closest
60- or 90-degree position
Flip-Up Seat
: Save space on your stairs when your stairlift is
not in use by flipping up the seat and armrests.
Swivel release
handle
Power Swivel Seat Option
• Release the armrest control once your stairlift has stopped at the top landing.
• Engage the power swivel seat feature by pressing the armrest control again.
(in the same direction you pressed to travel up the stairs).
• Release the armrest control switch once the seat has fully rotated.
• Unbuckle and carefully exit the seat.
Power Footrest Option
An optional power footrest makes it easy to fold the stairlift footrest without leaning over.
•
Raise the stairlift seat to the “stored” position, and the footrest will automatically fold up.
• Lower the seat, and the footrest will automatically fold down.
• Raise and lower the footrest by moving the seat up or down. Attempting to manually fold
a power footrest option can damage the unit.
Note:
If jam occurs when raising/lowering the footrest, clear the jam and move the seat
up and down until the footrest moves again. If normal operation is not restored, please
contact your Bruno dealer for service.
Mid-Park Position Option
The mid-park position option allows you to park and charge the stairlift at a position between
the two ends of the rail – such as a landing in the middle of a staircase. If you have a
mid-park position option, your stairlift will automatically stop and beep in the mid park
position. To continue traveling up or down stairs, press armrest control in the direction you
wish to travel (or engage wireless remote call/send control).
Note:
Optional keyed switch units – Turning the
armrest key to the OFF position disables both
the remotes.