CRE-2110 OPERATOR 09-27-2021
5
Bruno’s stairlift features a “soft-start,” preventing the unit from moving abruptly after the armrest
control switch is pressed.
Press and hold the armrest control to begin the gentle acceleration of
the stairlift to operating speed.
The stairlift will
automatically stop at the upper or lower end of
the rail or when the armrest control is released.
Units
equipped
with an
armrest k
ey
switch: Turning the key to the OFF position will
disable the unit and the remote call/send transmitters.
How to Operate Your Bruno Stairlift
• Position yourself in stairlift seat
• Ensure the seat is in the proper riding position: rider back to the stairway wall
- Raise and hold the seat swivel lever to rotate the seat to the “riding position,” if needed.
- Release the seat swivel lever to secure seat. The stairlift will not operate unless the seat
is locked in the “riding position,” a right angle to the rail.
• Fasten the positioning belt.
• Position both feet on the footrest and arms on armrest cushions.
•
Key switch units: Turn the key to ON position.
• Press and hold armrest control switch to travel up or down the rail.
• Raise and hold the seat swivel lever at top landing; rotate the seat to desired position.
• Release seat swivel lever and allow seat to lock in position.
•
Key switch units: Turn the key to OFF position.
• Unbuckle positioning belt and carefully exit the seat.
• Fold armrests, seat and footrest when not in use, if preferred.
Note:
Optional keyed switch units – Turning the armrest key to the OFF position disables both
the remote call/send controls.
Wireless Remote Operation
Your stairlift is equipped with an IR repeater remote
control system, designed specifically for curved
stairlifts. The receiver must be plugged into a
wall outlet for the remotes to function. If the
remotes are not mounted to the wall, please point
the remotes at the transmitter “disc” to activate
the stairlift.
Note:
The remotes are designed to call/send
an empty stairlift only.
OPERATION
Disc
