Transport and start-up
Brune B 280 Evaporative humidifier
16
Preparing the humidifier for operation
3.2 Preparing the humidifier for operation
Power Supply
Fig. 4: Connecting to the power
supply
Filling the water container
Fig. 5: Filling the water container
Waterfresh (optional)
1.
Check the power supply and mains plug for damage.
2.
Connect the power supply to the connecting socket (Fig.
4/1) on the humidifier.
3.
Insert the mains plug.
4.
Turn on the device
Chapter
3.3 „Starting up the
humidifier
“ on page 17
1.
Open the filling flap (Fig. 5).
2.
Fill up with water until the WATER TANK
is flashing
green.
3.
Close the filling flap.
Additionally, Waterfresh can be added to reduce
the build-up of germs, algae and calcifications. Observe the
information provided on the packaging of Waterfresh regarding
dosage, use and disposal.
Waterfresh can be obtained from our customer service department
(
“
Customer service
“ on page 4).
Order number:
1l bottle: 9020
5l canister: 9022
Damaged mains cable!
If the mains cable of this unit is damaged, it must
be replaced by the proper connecting cable!
–
This is available from the manufacturer or the
customer service department.
NOTICE!
Danger of material damage from over-filling the
humidifier!
There is a threat of the water container overflowing if
the WATER TANK display lights up green and filling
continues.
