Transport and start-up
Brune B 280 Evaporative humidifier
20
Starting up the remote sensor system (optional accessories)
3.4 Starting up the remote sensor system (optional accessories)
Measuring the humidity
Starting up the remote sensor
system
Fig. 7: Opening the cover
The remote sensor system measures the relative humidity in the
room and transmits this via radio to the humidifier. This enables a
more exact measurement than by measuring with the sensors
installed in the unit, with which deviating measurement results may
occur due to dampness within the unit
1.
Carefully lift up and remove the cover of the remote
sensor system with a small screwdriver (Fig. 7).
Fig. 8: Replacing the batteries
2.
Insert the supplied 1.5 V AA batteries as illustrated
(Fig. 8/1). The plus and minus poles are marked on both
the circuit board and the battery. The batteries are inserted
correctly if these markings correspond.
Using the remote sensor system is recommended
if precise control of the humidity is required.
1
