Transport and start-up
Brune B 280 Evaporative humidifier
22
Coding the humidifier
3.5 Coding the remote sensor system
1.
Code the remote sensor system by adjusting the slider with a
suitable non-metallic object.
2.
Confirm the coding by pressing the small, black button.
The coding can be read out and selected on the device.
3.
Close the cover of the remote sensor system again.
Fig. 10 Slider for coding
Selecting the menu
In this menu, you can select the coding of the humidifier.
Deactivate the device by pressing the Standby
button. Press
the Standby
button again for about 5 seconds until the display
shows
„Ad“. Select the menu by pressing the
FAN
button.
With the
HUMIDITY
and
button changes can be made in the
menu.
NOTICE!
Material damage from short circuit!
– Only code the remote sensor system with a
non-metallic object.
