Transport and start-up
Brune B 280 Evaporative humidifier
19
Starting up the humidifier
To switch off the keylock, press the HUMIDITY
and
HUMIDITY
buttons simultaneously until the
„88“ display
goes out.
The keylock is deactivated.
Switching ionisation on/off
Ionisation cleans the room air. Ions occur naturally as positively or
negatively charged particles. The ion concentration and the ratio
between positively and negatively charged ions are decisive for the
air quality. Polluted air in living and work area is low in negatively
charged ions. Through ionisation, negatively charged ions are
emitted which combine with dust particles to form so-called clusters
and are withheld in the filter.
To turn on ionisation, press the IONIZER
button.
Ionisation is switched on. The IONIZER ON
display
illuminates.
To turn off ionisation, press the IONIZER
button.
Ionisation is switched off. The IONIZER ON
display
goes out.
Activate/Deactivate the
signal tone
Deactivate the device by pressing the Standby
button. Press the
Standby
button again for about 5 seconds until the display shows
„Ad“.
Switch into the submenu
„b1/b0“ by pressing the FAN
button. Press the
HUMIDITY
button to activate (b1) or to deactivate (b0) the signal tone.
After the setting has been made, exit the menu by pressing the
Standby
button.
Ventilation flaps
Fig. 6: Opening the ventilation flaps
To enable improved distribution of the humidified air in the
room, open the ventilation flaps on the upper surface of the
unit (Fig. 6).
The function of the humidifier is also guaranteed with the
ventilation flaps closed.
