BRULA NEO service instructions
Dated 03/18
Page
17 of
52
3.5.1. Motor cable
A motor extension cable is used between the control and motor. The polarity of
this cable cannot be reversed, i.e. it can only be connected up in one position.
Motor cables are always assigned in the same way:
Motor
cable
Extension
cable
Terminal name
in plug
connector
Terminal name
for THROTTLE
VALVE
white
grey
N
0-10V
black
black
PE
GND
red
Brown
l
24V
If the motor cable is too short, it can be extended with a copper wire measuring
3 x 0.75 mm² to a length of about 10 metres. For other lengths, please consult
BRULA. Ensure that the wires are connected up correctly.
