BRULA NEO service instructions
Dated 03/18
Page
27 of
52
Display:
Here, among other things, is the Screen Saver sub-menu. Here you
can choose the brightness level you wish to have for the screen saver. If you
choose several temperatures, these will be displayed at 7-second intervals. If
you pull the brightness controller all the way to the left, the display will go dark.
The screen saver switches on automatically about 2 minutes after the most
recent keystroke. The screen image reappears whenever you touch the display.
Note: With water applications, it is advisable to display the temperature at
the top in the buffer. This means that you can see immediately the level of
progress of the loading of the buffer.
In addition, there is a "Cleaning the display" sub-menu. This switches off the
display for 2 minutes. During this time, it accepts no commands. This means
you can clean without altering any of the settings. For checking purposes, a
timer runs backwards and shows the remaining time.
Sound:
Here the button acknowledgement sounds and the alarm sounds can
be selected. Also, the volume level can be adjusted. All sound events can also
be switched off here.
Operation auto/manual:
Here you can switch form Automatic to Manual mode.
To do this, move the "auto/man" control knob to the right. Now a position can
be selected for the throttle valve and it can be sent off using the SAVE button
at the top right. To return to Automatic mode, slide the control knob to the left
again and save it.
CAUTION: Operation of the fireplace in Manual mode is at the user's own
risk! During a burnup, the air control lever must never be closed to the
point where an explosion might occur. We urgently advise that you ONLY
operate the control system IN AUTOMATIC MODE.
Language:
Here, you can select the menu language of your choice. Available
at the present time: GB - DE - NL - FR - IT - ES - PL - CZ - SE
Deactivating the door:
Exactly as in the display (see above), the door
detection can be deactivated for 2 minutes. This can scale down the glow
without the control system initiating a new burnup when the door is next opened.
System information:
Here you will find details about the details of the
respective versions of software used.
