Bruker NMR CryoFIT, Installation Manual

Page: 22 / 40

Inserting the Flow Cell
22 H12214_1_003
• Hold the CryoFIT and insert it into the holder.
• Carefully insert the inlet capillary into the shim system.
The capillary will glide smoothly into the probe and come out through the T-piece of the
VT gas adapter.
If you feel some slight resistance when the capillary hits the T-piece at the probe bottom,
cautiously increase the force slightly to push the capillary through.
• Put the CryoFIT into the CryoFIT Mounting Unit. If the capillary gets stuck:
– Make sure the insert guide is in the shim system.
– Ask someone else to move the T-piece back and forth while you insert the capillary.
Figure 6.7: Inserting the Capillary