Bruker NMR CryoFIT, Installation Manual

Page: 15 / 40

Installation
H12214_1_003
15
5 Installation
The installation of the CryoProbe for NMR applications with standard sample and flow cell
varies depending on whether the CryoProbe is warm or cold:
• Installation with a Warm CryoProbe [
}
15]
• Installation with a Cold CryoProbe [ } 16]
Assembling the CryoFIT Accessory [
}
16] is the same for either case.
5.1 Installation with a Warm CryoProbe
• Insert the CryoProbe into the magnet.
• Plug in the T-piece for the VT gas and capillary and connect the CABLE BVT-CRP (P/N
Z14278).
Figure 5.1: Bottom of CryoProbe (left) and T-Piece (right)
• Mount the ATM unit or the mechanical Tuning & Matching adapter.