Bruker NMR CryoFIT, Installation Manual

Page: 33 / 40

Dismantling and Disposal
H12214_1_003
33
8 Dismantling and Disposal
Retrofitting, repairs, adjustments or dismantling of the device must only be carried out by
Bruker Service or personnel authorized by Bruker. Damage due to servicing that is not
authorized by Bruker is not covered by your warranty.
8.1 Dismantling
Before starting dismantling:
1. Shut down the device and secure to prevent restarting.
2. Disconnect the power supply from the device; discharge stored residual energy.
3. Remove consumables, auxiliary materials and other processing materials and dispose of
in accordance with the environmental regulations.
4. Clean assemblies and parts properly and dismantle in compliance with applicable local
occupational safety and environmental protection regulations.
8.2 Disposal
After the lifespan of the product, Bruker takes responsibility for disassembly and disposal in
accordance with the European Directive WEEE 2012/19/EC. Bruker BioSpin will take back
the components free of charge upon request by the customer. If the customer wants to
arrange disposal on their own, then this must be stated when the product is ordered.
European Waste Electrical and Electronic Equipment Directive (WEEE 2012/19/EC)
Do not dispose in domestic household waste.
The affixed label indicates that it is prohibited to discard this electrical/electronic product in
domestic household waste, in compliance with the European Waste Electrical and Electronic
Equipment Directive (WEEE 2012/19/EC).