Bruker Gilson, Installation Manual

Page: 11 / 30

11
Z31545_00_006
Mounting the Barcode Reader
3. Affix the two adhesive fasteners to the Z-tower arm as shown in Figure 3.3: and fas-
ten the barcode reader cable to them using the two plastic strips.
The lower cable socket should be placed about 20 mm above the motor and the
upper socket about 20 mm below the upper end of the Z-tower.
Figure 3.3: Securing the Barcode Cable
4. Affix the barcode reader cable to the Gilson Control Unit cable using the spiral hose
(see figure 3.4).
Cable fasteners
with fastening
strips
20 mm
20 mm