Bruker Gilson, Installation Manual

Page: 21 / 30

21
Z31545_00_006
Software
• Select the submenu TEST Initialize barcodes before reading a barcode for the first
time.
• Select the submenu TEST Read one Barcode (max. 10 sec.) .
- The red light on the reader will switch „ON“ and the barcode will be read for a max-
imum of 10 seconds.
- When reading the barcode, the green LED on the barcode reader will be „ON“ and
the result of the reading will be displayed in a popup window as shown below (the
red light of the reader will switch „OFF“).
The terminal program ( ...\Barcode Reader\Terminal.exe ) can also be used to check
and to program the barcode reader:
When the barcode reader is connected to serial port 1, open the predefined terminal pro-
gram „
GilBarc1.trm “. Otherwise, when the barcode reader connected to serial port 2
open the terminal program „ GilBarc2.trm “.
Figure 4.11: The Terminal Program
The function keys at the bottom of the program window can be used to perform the vari-
ous program tasks. For example, press
READ to check the barcode reading. After a cor-
rect reading the barcode information will be written in the text field as shown in Figure
4.12: .