Brudden Movement WCSR, Owner'S Manual

Page: 62 / 153

ASSEMBLY
5
11
TOOLS
SCREW TIGHTENING TORQUE
SPECIFICATION TABLE
ICONS
Torque [N.m]
9-12
22-29
Diameter [mm]
M6
M8
M10 45-58
CAUTION!
Before starting to assemble the equipment, it is necessary to pay attention to the following precautions:
•Check that the packaging is not damaged and that the parts and components of the equipment are not damaged.
•We recommend that the equipment be unpacked at the place where it will be assembled.
•The assembly site must be clean.
•Floor must be #at and level, " rm / hard to avoid equipment instability.
•The space around the equipment must be clear, as described in this Manual.
•It is recommended that the equipment be assembled away from moisture and out of sunlight to avoid damage to parts
of the equipment
•The icons instruct the user which tool to use, how many people to use to assemble the equipment, or to cross-tighten the
screws in a given step.
Allen
Philips
Screw
driver
Fixed wrench Medium torque
thread lock
WARNING!
THE MOUNTING OF THE TOWER IS THE SAME FOR BOTH SIDES OF THE EQUIPMENT. TO
ASSEMBLE THE OTHER SIDE JUST FOLLOW AGAIN THE SAME STEPS DESCRIBED IN THE
MANUAL.
50%
Not giving
" nal tightening to
the screws
100%
give " nal
tightening to the
screws
leveling
LEVEL TO
THE FLOOR
Leveling the
equipment
to the # oor
25%
S
Only touch the
screw into the
part
2x
For this assembly
it is recommended
that it be done by
two people or more
1x
For this assembly
it is recommended
that it be done by
one person or more