Brudden Movement WCSR, Owner'S Manual

Page: 100 / 153

49
MAINTENANCE
7
EQUIPMENT MAINTENANCE TABLE
Use the following table to " nd out the frequency of maintenance.
VERIFY
DAILY
WEEKLY MONTHLY
WHEN I NEED
SCREW
Retighten the screws if
the parts are loose.
CLEANING
Always clean the
equipment before and
after each training.
PULLEYS
Check that the pulleys
are not damaged or worn.
Caseare out of their original
form to make the change.
INTERLOCK PIN
Check that the pins are
not damaged or worn. or
are out of their original
form to make the change.
TENSIONER
Always check and tension the steel
cable as described in this manual.
Any questions can be answered through our customer service center by telephone 0800-7724080. To " nd an Authorized Point visit
the website http://movement.com.br/assistencia-tecnica and allow the browser to access your location and make it easier for you to
search for a nearby Authorized Point.
When in contact with an Authorized Point, keep the following records in hand:
STEEL CABLE
Check that the steel
cables are not damaged.
If so, do not use
equipment and change
the cable immediately.
TOWER
SELECTOR PIN
If the selector pin is
damaged, do not use the
pin and have the part
replaced immediately.
Shroud
Check that the Shroud is
not damaged. If you are
doing the immediate
exchange of the part
Model____________________________
Serial No. _________________________
Date of invoice______________________________
Copy or original invoice (in case of warranty) _______________________
SUPPORTS
Check if the load supports are
damaged or worn or are out of
their original form to make the
change.
SERIAL NUMBER
The serial number contains information relevant to the equipment class and manufacturer data.
Do not remove the sticker from the serial number as it facilitates the delivery of information to
an authorized point or to the manufacturer. If the sticker with the serial number peels off,
contact the manufacturer immediately.
SAFETY BAR
Always check that the
safety bar is not damaged
SAFETY LOCK Always check that the
safety lock is not damaged