BRP Can-Am Defender 2022 Series, Operator'S Manual

Page: 136 / 240

134
R Re em mo ovviin ng g tth he e C CV VT T A Aiirr F Fiilltte err
1. Tilt the cargo box.
2. Press the filter tabs to release it.
1. Press here
3. Remove the CVT air filter.
IIn nssp pe eccttiin ng g a an nd d C Clle ea an niin ng g tth he e C CV VT T
A Aiirr F Fiilltte err
1. Inspect filter and replace if
damaged.
2. Clean filter using a solution of soft
soap and water, then rinse.
3. Gently shake off excess water and
allow filter to dry at room
temperature.
4. Clean inside the CVT air inlet with
a vacuum cleaner.
IIn nsstta alllliin ng g tth he e C CV VT T A Aiirr F Fiilltte err
1. Reinstall CVT air filter.
2. Lower and lock the cargo box.
E Evva ap po orra attiivve e E Em miissssiio on n
S Syysstte em m P Prre e--F Fiilltte err ((IIff
E Eq qu uiip pp pe ed d))
E Evva ap po orra attiivve e E Em miissssiio on n S Syysstte em m
P Prre e--F Fiilltte err R Re ep plla acce em me en ntt
1. Tilt the cargo box.
2. Remove the hose clamps.
3. Remove the retaining screws.
4. Remove the pre-filter assembly.
1. Pre-Filter
2. Retaining screw
3. Clamps
5. Install a new pre-filter assembly.
T Tiig gh htte en niin ng g T To orrq qu ue e
Pre-filter
retaining
screw
2.5 ± 0.5 Nm
(22 ± 4 lbf-in)
6. Secure hoses with clamps.
7. Install all other removed parts.
E En ng giin ne e O Oiill
R Re ecco om mm me en nd de ed d E En ng giin ne e O Oiill
Rotax ® engines were developed and
validated using the XPS™ oil.
BRP recommends the use of its XPS
engine oil or an equivalent at all time.
Damages caused by the use of an oil
not suitable for the engine may not be
covered by the BRP Limited Warranty.
1. XPS recommended engine oil
General
purpose
XPS 4T 5W40
synthetic blend oil
Cold
temperature
XPS 4T 0W40
synthetic oil
Warm
temperature
XPS 4T 10W50
synthetic oil
MAINTENANCE PROCEDURES