BRÖTJE IDA, User Manual

Page: 12 / 48

For more information, see
Main screen setting, page 23
Display current or target temperature, page 23
2.7 Messages on the display
The display of the IDA can show several messages:
Tab.5 Messages on the display
Message Meaning
Help message The display can show a help message after you change to a different mode. The message in­
forms you about the use of the quick access menu.
Service message The display shows a service message when the appliance needs maintenance.
Error message The display shows an error message when the appliance has an error.
Important
The error code in the error message comes from the appliance.
For more information, see
Show help messages, page 23
Service message, page 37
Error messages overview, page 36
2.8 Zone selection
If you have multiple zones in your heating installation, you can control the
temperature in every zone. A zone can be a specific room or, for example
a floor. If there is an IDA in every zone, you can control a zone only with
its own IDA.
If there is an external temperature sensor and one IDA in the installation,
you can control the temperatures in the zones with this IDA.
The zones are named CircA, CircB etc. by default. You can change the
names on the IDA or in the app.
For more information, see
Changing the zone temperatures, page 17
Changing the name of a zone, page 25
2.9 Presence detection
The main screen of the display will light up (for 5 seconds) if the presence
sensor detects that you are in front of the IDA or pass by. You can disable
the presence sensor in the settings menu.
For more information, see
Presence sensor, page 23
Fig.18
AD-3001127-01
21
.0
°C
10
.0
2 Introduction
12 7726708 - v.01 - 18012019