Brother P-touch PT-D800W User Manual Download Page 173

Page: 173 / 244

162

The software can be upgraded to the latest available version using the P-touch Update Software.

Note

• The actual software and the contents of this manual may differ.
• Do not turn off the power when transferring data or updating firmware.

Updating P-touch Editor

Important

The printer driver must be installed before updating P-touch Editor.

Double-click the

P-touch Update Software

icon on the desktop.

Note

The following method can also be used to start P-touch Update Software:
Double-click

Macintosh HD

Applications

P-touch Update Software

, and then double-click the

P-touch Update Software

application icon.

Click the

Computer software update

icon.

How to Update P-touch Software

Summary of Contents for P-touch PT-D800W





















































































































































































































































Search results

Summary of Contents for P-touch PT-D800W

Reviews:

Brands by name

Popular brands

Brother P-touch PT-D800W, User Manual

Search results

Summary of Contents for P-touch PT-D800W

Reviews:

Brands by name

Popular brands