manualshive.com logo in svg

Brother P-touch BB4, Service Manual

The Brother P-touch BB4 user manual, available for free download, includes a comprehensive Parts Reference List to help troubleshoot and maintain your device. Get quick access to this essential manual on manualshive.com, ensuring you have all the information you need for optimal use of your Brother P-touch BB4.

Share
Download
background image

II

 - 10

  Disassembling the Chassis ASSY

When handling the thermal head ASSY, do not touch the thermal head by hand. It may be
easily damaged due to the electricity charged in your body.
(1) Remove the screw from the thermal head ASSY and take off the ASSY.
(2) Remove the retaining ring from the shaft of the chassis ASSY.
(3) Pull up the roller holder ASSY together with its spring.
(4) Remove the two screws from the chassis ASSY and take off the DC motor ASSY.

 Figure 2.2-6  Disassembling the Chassis ASSY

 

Summary of Contents for P-touch BB4



































































Reviews:

No comments

Related manuals for P-touch BB4

SATO M10e Series Specifications preview
M10e Series
Brand: SATO Pages: 2
La Pavoni BAR-STAR Series Installation Set-Up Check List preview
BAR-STAR Series
Brand: La Pavoni Pages: 5
Ice-O-Matic MF2005 Parts And Service Manual preview
MF2005
Brand: Ice-O-Matic Pages: 112
Browne & Co 83 7418 Instruction Manual preview
83 7418
Brand: Browne & Co Pages: 9
Gaggia 740909008 Operating Instructions Manual preview
740909008
Brand: Gaggia Pages: 92
Fagor Built-In Coffee Machine MQC-A10 US Care & Instruction Manual preview
Built-In Coffee Machine MQC-A10 US
Brand: Fagor Pages: 76
Krups XP 5050 Operating Manual preview
XP 5050
Brand: Krups Pages: 11
iDPRT SP450 Quick Start Manual preview
SP450
Brand: iDPRT Pages: 12
Team Kalorik TKG CHM 1001 Operating Instructions Manual preview
TKG CHM 1001
Brand: Team Kalorik Pages: 44
Bialetti MOKISSIMA CF44 Instructions For Use Manual preview
MOKISSIMA CF44
Brand: Bialetti Pages: 64
Royal REALE Instructions For Use Manual preview
REALE
Brand: Royal Pages: 28
Manitowoc MAC 6 K058 Installation Instructions preview
MAC 6 K058
Brand: Manitowoc Pages: 2
Ice-O-Matic GEM0650A/W/R Service & Parts Manual preview
GEM0650A/W/R
Brand: Ice-O-Matic Pages: 13
Deni 6100 Instructions For Proper Use And Care preview
6100
Brand: Deni Pages: 4
Ziegra 1.750 Operating Instructions Manual preview
1.750
Brand: Ziegra Pages: 9
Ziegra ZBE 110 Operating Instructions Manual preview
ZBE 110
Brand: Ziegra Pages: 10
La Cimbali M28 START Manual preview
M28 START
Brand: La Cimbali Pages: 36
Manitowoc GR1200A Installation Instructions Manual preview
GR1200A
Brand: Manitowoc Pages: 16

Brands by name

Popular brands

Load more brands