Brother P-Touch 9200DX, Quick Reference

Page: 29 / 232

25
Using the PT-9200DX
After you have designed a label layout using the P-touch Editor application, you can print it out to make a label.
Installing the tape cassette
1 Press down on the cover release button and lift open the tape compart-
ment cover.
2 If you are using a new tape cassette, first remove the stopper. (Some
tape cassettes may not be installed with a stopper.) Make sure that the
end of the tape feeds under the tape guides.
3 Insert the tape cassette firmly into the compartment, making sure that
the entire back of the cassette touches the bottom of the compartment.
When inserting the tape cassette, make sure that the ink ribbon
does not catch on the corner of the metal guide.
Be sure not to touch the print head.
4 Close the compartment cover, and then press the on/off button to turn
on the PT-9200DX .
End of the tape
Tape guide