Brother P-Touch 3600 User Manual Download Page 30

Page: 30 / 159

Ch. 2 Getting Started

Getting St

Double-click the Mac OS 9 folder to open it.

Double-click the P-touch Quick Editor
Installer icon in the folder that appears. The
installer starts up.

Select the installation method.

●

For a basic installation

Clicking the Install button immediately
starts installing the most basic options.

●

For a custom installation

Clicking the Custom Install button dis-
plays a dialog box that allows you to
select which options to install.

Only the options with a check mark
beside them are installed. Select the
options that you wish to install, and then
click the Install button.

When the dialog box appears, indicating
that the installation is finished, click the
Quit button.

When the dialog box appears, asking if you
wish to restart the computer, click the
Restart button to restart the computer.

With the P-touch and the Macintosh turned
off, connect the P-touch to the computer
using the enclosed USB interface cable as
described on page 9. Be sure to leave the
P-touch turned off.

Turn on the Macintosh.

Insert the enclosed CD-ROM into the com-
puter’s CD-ROM drive.

Double-click the Mac OS X folder to open
it.

Double-click the P-touch Quick Editor
folder to open it.

NOTE

About 20 MB of available hard-disk space is
needed to begin installation. If enough hard-disk
space is available, click the Install button.

NOTE

In order to print from the P-touch 9600/3600, “PT-
9600/3600 Driver” must be selected for installa-
tion.

With Mac OS X v10.1 or v10.2:

Summary of Contents for P-Touch 3600
































































































































































Search results

Summary of Contents for P-Touch 3600

Reviews:

Related manuals for P-Touch 3600

Brands by name

Popular brands

Brother P-Touch 3600, User Manual

Search results

Summary of Contents for P-Touch 3600

Reviews:

Related manuals for P-Touch 3600

Brands by name

Popular brands