Brother MFC-9840CDW User Manual Download Page 177

Page: 177 / 263

Troubleshooting and routine maintenance

167

The following message appears on the
LCD when the machine has finished
cleaning.

DRUM CLEANING
COMPLETED

Press

Stop/Exit

so that the machine

returns to the Ready state.

Try to print again. If this problem still
remains, repeat steps

several

times.
If the problem still remains after
repeating step

several times, go

to step

Turn off the machine’s power switch.
Unplug the telephone line cord first, and
then unplug the power cord from the
electrical socket.

Press the front cover release button and
then open the front cover.

Hold the green handle of the drum unit.
Lift the drum unit up and then pull it out
until it stops.

Summary of Contents for MFC-9840CDW








































































































































































































































































Search results

Summary of Contents for MFC-9840CDW

Reviews:

Brands by name

Popular brands

Brother MFC-9840CDW, User Manual

Search results

Summary of Contents for MFC-9840CDW

Reviews:

Brands by name

Popular brands