Brother MFC-9840CDW, User Manual

Page: 154 / 263

144
Checking if the machine has
faxes in its memory
C
If the LCD shows an error message then you
can check to see if there are faxes in the
machine’s memory.
a
Press Menu , 9 , 0 , 1 .
b
Do one of the following:
„
If the LCD shows
No Data
, there
are no faxes left in the machine’s
memory.
Press
Stop/Exit .
„ If the LCD shows
Dial & Start
,
there are faxes in the machine’s
memory.
• You can send the faxes to
another fax machine. (See
Transferring faxes to another fax
machine
on page 144.)
• You can send the faxes from the
machine’s memory to your PC.
(See
Transferring faxes to your
PC on page 144.)
Note
• You can send the Fax Journal report to
another fax machine by pressing
Menu , 9 , 0 , 2 in
a
.
• Menu , 9 selection will appear only when
the LCD shows an Error Message.
Transferring faxes to another
fax machine
C
If you have not set up your Station ID (See
Quick Setup Guide ), you cannot enter fax
transfer mode.
a
Follow
a
and
b
in Checking if the
machine has faxes in its
memory
on page 144.
b
Enter the fax number to which faxes will
be sent.
c
Press Mono Start or Colour Start .
Transferring faxes to your PC
C
You can move the faxes from your machine’s
memory to your PC.
a
If you have followed
a
and
b
in
Checking if the machine has faxes in its
memory
on page 144, press Stop/Exit .
b
Make sure that you have installed
MFL-Pro Suite on your PC, and then
turn on PC-FAX Receiving on the PC.
(For details about PC Fax Receive, see
PC-FAX receiving in the Software
User’s Guide on the CD-ROM
.)
c
Make sure that you have set
PC Fax Receive
on the machine.
(See PC fax receive on page 68.)
During setup the LCD will ask if you
want to send the faxes to your PC.
d
Do one of the following:
„ To send all faxes to your PC, press 1 .
„ To exit and leave the faxes in the
memory, press
2 .
e
The LCD will ask you the following
message:
25.Remote Fax Opt
Backup Print
a
Off
b On
Select
ab
or OK
Press
a
or
b
to choose
On
or
Off
.
Press OK .
f
Press Stop/Exit .