Brother MFC-8880DN User Manual Download Page 31

Page: 31 / 234

Loading paper and documents

Loading documents

Using the automatic
document feeder (ADF)

The ADF can hold up to 50 pages and feeds
each sheet individually. Use standard 80 gsm
paper and always fan the pages before
putting them in the ADF.

IMPORTANT

• DO NOT leave thick documents on the

scanner glass. If you do this, the ADF may
jam.

• DO NOT use paper that is curled,

wrinkled, folded, ripped, stapled, paper-
clipped, pasted or taped.

• DO NOT use cardboard, newspaper or

fabric.

• To avoid damaging your machine while

using the ADF, DO NOT pull on the
document while it is feeding.

Note

To scan non-standard documents see

Using the scanner glass

on page 22.

Make sure documents written with ink are
completely dry.

Documents to be faxed must be from 148
to 215.9 mm wide and from 148 to
355.6 mm long, and of a standard weight
[80 gsm].

Unfold the ADF document output
support flap (1) and the ADF support
flap (2).

Fan the pages well.

Place your document

face up, top edge

first

in the ADF until you feel it touch the

feed roller.

Adjust the paper guides (1) to fit the
width of your document.

Summary of Contents for MFC-8880DN











































































































































































































































Search results

Summary of Contents for MFC-8880DN

Reviews:

Related manuals for MFC-8880DN

Brands by name

Popular brands

Brother MFC-8880DN, User Manual

Search results

Summary of Contents for MFC-8880DN

Reviews:

Related manuals for MFC-8880DN

Brands by name

Popular brands