manualshive.com logo in svg

Brother MFC-8880DN, User Manual

Share
Download
Brother MFC-8880DN User Manual Download Page 166

156

Cleaning the drum unit

C

If you have print quality problems, clean the 
drum unit as follows.

a

Turn off the machine. Unplug the 
telephone line cord first, and then 
unplug the power cord from the 
electrical socket. 

b

Open the front cover and slowly take out 
the drum unit and toner cartridge 
assembly.

 

IMPORTANT

• We recommend that you put the drum unit 

and toner cartridge assembly on a clean, 
flat surface with a sheet of disposable 
paper or cloth underneath it in case you 
accidentally spill or scatter toner.

• To prevent damage to the machine 

caused by static electricity, DO NOT touch 
the electrodes shown in the illustration.

 

 

c

Push down the blue lock lever and take 
the toner cartridge out of the drum unit. 

 

IMPORTANT

• Handle the toner cartridge carefully. If 

toner scatters on your hands or clothes, 
wipe or wash it off with cold water at once.

• To avoid print quality problems, DO NOT 

touch the shaded parts shown in the 
illustrations below.

 

 

d

Put the print sample in front of the drum 
unit, and find the exact position of the 
poor print.

 

Summary of Contents for MFC-8880DN











































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands