manualshive.com logo in svg

Brother MFC-8880DN, User Manual

Share
Download
Brother MFC-8880DN User Manual Download Page 159

Troubleshooting and routine maintenance

149

C

IMPORTANT

We recommend that you place the drum 
unit and toner cartridge assembly on a 
clean, flat surface with a sheet of 
disposable paper or cloth underneath it in 
case you accidentally spill or scatter toner.

 

c

Push down the blue lock lever and take 
the toner cartridge out of the drum unit. 
Take out the jammed paper if there is 
any inside the drum unit.

 

IMPORTANT

• Handle the toner cartridge carefully. If 

toner scatters on your hands or clothes, 
wipe or wash it off with cold water at once.

• To avoid print quality problems, DO NOT 

touch the shaded parts shown in the 
illustrations below.

 

 

d

Clear the jammed paper if there is any 
inside the drum unit.

e

Put the toner cartridge back into the 
drum unit until you hear it lock into place. 
If you put it in correctly, the blue lock 
lever will lift automatically. 

 

f

Put the drum unit and toner cartridge 
assembly back in the machine.

 

g

Close the front cover.

Summary of Contents for MFC-8880DN











































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands