manualshive.com logo in svg

Brother MFC-8880DN, User Manual

Share
Download
Brother MFC-8880DN User Manual Download Page 156

146

IMPORTANT

To prevent damage to the machine 
caused by static electricity, DO NOT touch 
the electrodes shown in the illustration.

 

Note

The LCD names for the paper trays are as 
follows:

• Standard paper tray: 

Tray 1

• Optional lower tray: 

Tray 2

• Multi-purpose tray: 

MP Tray

 

 

Paper is jammed in the MP tray

C

If the LCD shows 

Jam MP Tray

, follow 

these steps:

a

Remove the paper from the MP tray.

b

Remove any jammed paper from in and 
around the MP tray.

 

c

Close the MP tray. Then open the front 
cover and close it to reset the machine.
Open the MP tray again.

d

Fan the paper stack, and then put it back 
in the MP tray.

 

e

When loading paper in the MP tray, 
make sure that the paper stays under 
the maximum paper height guides on 
both sides of the tray.

 

Summary of Contents for MFC-8880DN











































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands