Brother MFC-885CW User Manual Download Page 155

Page: 155 / 203

Troubleshooting and Routine Maintenance

143

Checking the ink volume

Although an ink volume icon appears on the
LCD, you can use the

Ink Management

key

Menu

keys to see a large graph

showing the ink that is left in each cartridge.

Do one of the following:

(MFC-680CN)

Press

Ink Management

and go to

step

(MFC-885CW)

Press

Menu

(MFC-885CW)
Press

to choose

Ink

Press

to choose

Ink Volume

Press

The LCD shows the ink volume.

Press

Stop/Exit

Note

You can check the ink volume from your
computer. (See

Printing

for Windows

Printing and Faxing

for Macintosh

in the

Software User’s Guide on the CD-ROM.)

Uninstalling and installing the
handset and handset cradle
(MFC-680CN only)

If you do not use the handset you can remove
the handset and handset cradle.

Uninstalling the handset and handset
cradle

Unplug the curled handset cord from the
machine.

Pull the tab (1) back and hold it in
position as you push the cradle (2) to the
back of the machine.

Attach the side cover.

Summary of Contents for MFC-885CW












































































































































































































Search results

Summary of Contents for MFC-885CW

Reviews:

Brands by name

Popular brands

Brother MFC-885CW, User Manual

Search results

Summary of Contents for MFC-885CW

Reviews:

Brands by name

Popular brands