Brother MFC-885CW User Manual Download Page 145

Page: 145 / 203

Troubleshooting and Routine Maintenance

133

Document is jammed inside the ADF
unit

Take out any paper from the ADF that is
not jammed.

Lift the document cover.

Pull the jammed document out to the
left.

Close the document cover.

Press

Stop/Exit

Printer jam or paper jam

Take out the jammed paper depending on
where it is jammed in the machine. Open and
close the scanner cover to clear the error.

Pull the paper tray (1) out of the
machine.

Pull out the jammed paper (1) and press

Stop/Exit

If you cannot remove the jammed
paper from the front side, or the error
message still appears on the LCD
after you remove the jammed paper,
please go to the next step.

Remove the Jam Clear Cover (1) from
the back of the machine. Pull the
jammed paper out of the machine.

Summary of Contents for MFC-885CW












































































































































































































Search results

Summary of Contents for MFC-885CW

Reviews:

Brands by name

Popular brands

Brother MFC-885CW, User Manual

Search results

Summary of Contents for MFC-885CW

Reviews:

Brands by name

Popular brands